Functional Description

The Model ASC300Ku-T Beacon Tracking Receiver is a high performance self-contained unit that is designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The ASC300Ku-T will tune over the three primary Ku band satellites (10.95-11.70 GHz, 11.70 – 12.20 GHz, 12.25 – 12.75 GHz).

Click Below:

For our Extended Tri band Unit (10.7 to 12.75 GHz)

The applications for the ASC300Ku-T Beacon Tracking Receivers:

	Antenna Tracking Controllers
	Uplink Power Controllers

System Specifications

	Input Frequency.......................................10.95 to 12.75 GHz                                                        Internal Block Converter
	Pre-detection Bandwidth................................40 kHz Standard                                                           Other Bandwidths Available
	Input Level.................... -80 dBm, minimum; -50 dBm, maximum                                             For full tracking range capability
	Frequency Tuning............................................. 10 kHz Steps
	Frequency Adjust............................... Front Panel or Remotely
	Frequency Stability............................... <1 ppm, 00c to +500c
	AFC...................................................................... +20 kHz
	Threshold...............................<45 dB-Hz (C/N0) for acquisition
	Input Impedance..................................................... 50 Ohm
	Input Connector.......................Type-N, Female (SMA Optional)
	Output Impedance................................100 Ohm, single ended
	Output Connector.......................Terminal Plug and BNC Female
	Tracking Gradient..................................... 0.5 V/dB, Standard
	Tracking Response... 0 to +10 VDC for a 20dB input level change
	System Level Adjust......................................... 30 dB, Linear
	Frequency Reference.................................. 10 MHz (Internal)
	Phase Noise................................ >75 dB-Hz,1kHz from Carrier
	Alarms................................................. Unit Lock, LNB Power
	Alarm Relay............................................................. Form-C
	External LNB Power............................... No External LNB Power
	Continuous Digital Streaming (CDS).................RS-232 or RS-422 DB-9 female connector on rear...........(Optional) SEE BELOW *
	Front Panel Display.................................. Vacuum Fluorescent
	M & C...............RS-232 or RS-422/485 Switchable on rear panel                                           Ethernet 10/100 Base T (optional)
	M & C Connector.............................................. DB-9, Female                                                                  RJ-45 Connector
	Size........................................ 1.75" H X 16.00" D X 19.00" W
	Weight........................................................ 14 lb. (6.35 kg)
	Primary Power........90 - 264 VAC, 47 - 63 Hz, 1.4A Auto-Sensing
	Operating Temperature......................................00c to +500 c
	Storage Temperature......................................-400c to +700 c
	Humidity......................................................95% RH @ 400 c

* CDS Continuous Digital Streaming
The streaming option associated with the ASC300 series of beacon tracking receivers provides a continuous, two byte, data stream running at 9600 baud that contains twelve bits of signal strength level indication as well as lock or alarm condition of the unit. Other baud rates are available. A female DB9,  interface connector on the rear of the unit is specifically dedicated for this option.

        Beacon Receiver Data Sheet View